Wed. Jun 7th, 2023

how to repair Philips led bulb: If you’re like most people, then you probably have a fair amount of old incandescent light bulbs lying around your house. LED bulbs are the most popular lighting solution today. They have high efficiency and long lifespan, but they tend to lose brightness as time goes by. If you notice that your Philips LED bulb isn’t as bright as it used to be, here’s how to repair it so that it lights up like new again.

Things you will need to Repair Philips LED Bulb

It’s always good to make sure you have all your necessary tools when working on something—as well as know how they work before you get started. You can find a list of things you will need, plus instructions on how to use each tool, here. This is especially true if it’s a repair that you’re doing.

To Repair a Philips LED Bulb, these things are required.

  1. Needle Nose Plier
  2. Screw Driver
  3. Soldering Iron
  4. Working Electric Extention Board
  5. LED Light Chip (if needs to be replaced)

Once you have all of your tools ready, you’ll need to locate your instructions. Follow them closely as they give detailed instructions on how to disassemble and reassemble your Philips LED bulb. Check out our guide on finding your repair manual here. Let us discuss them deeply.

Unscrew the top cap

If you’re dealing with a Philips LED bulb, you’ll need to unscrew two top screws. The first is usually silver, while another just below it (towards the base of your light) will be black or green. Remove both and discard. You should see a metal rod protruding from inside. This is what we call an end cap. You can remove it by hand if you want; however, doing so may cause damage to your lamp. Instead, use pliers or needle-nose pliers to pull out on either side of the end cap until it comes loose from its base inside your lamp.

Gently pull out the LED ring

Some LEDs are connected to an electronic circuit inside a clear plastic ring. If you can’t unscrew your bulb and need to repair it, start by removing that ring. To do so, turn off your light fixture and pull gently on the plastic ring until it comes free of its contacts. You may need to use needle-nose pliers if you’re having trouble getting it out of its housing.

Clean up the contacts on both sides of the PCB

Clean up any solder splatter or excess solder on both sides of your PCB. Use sandpaper if you have it, but don’t rely on sandpaper alone—most likely you’ll need a soldering iron with some rosin core solder to really clean up those contacts. Remember that when you re-solder these connections, they will be stronger than before. So make sure that everything is as good as it can be before moving forward!

Reassemble everything carefully

Once you’ve cleaned everything out of your bulb, check your instructions again to see how everything should be put back together. Some bulbs are meant to have some parts removed entirely, so make sure you don’t forget anything! If you’re still not sure about whether you can put it back together, consult a professional—but try taking it apart first. Most stores that sell lightbulbs have someone on staff who is knowledgeable and can help you figure out what went wrong and how to fix it.

Screw in base and test it before using again.

If you can’t remove your bulb from its socket, check that it is screwed in properly and test it before using again. Clean any dust from around the bulb, screw it back in and see if it works. If not, then you have an issue with your connection or fitting and should contact your local electrician or service provider. There are two main types of lamps: incandescent and fluorescent: Incandescent lamps use a tungsten filament as their light source, while fluorescent lamps contain mercury vapor which reacts when electricity passes through it.


LEDs are only going to become more and more important in our homes over time. Now that they are cheaper than ever, it’s well worth repairing broken bulbs before you replace them. There’s no need to waste money on new ones when you can easily fix those old incandescent or fluorescent versions. These easy repair methods will help keep you covered in case your home loses power during an outage.

By Arsal

Leave a Reply

Your email address will not be published. Required fields are marked *